Mitsubishi Melsec UDP/IP channel

Help Contents

Introduction

The Mitsubishi Melsec serial channel Channel Tag Icon provides a UDP SCADA/HMI communication channel to Mitsubishi Melsec PLCs.

Configuration Properties

The Mitsubishi Melsec UDP/IP channel supports the properties of the Mitsubishi Melsec Channel Tag plus these properties:

Property Type Version Description
Host WSTRING 1.1 The host name or IP address
Port WSTRING 1.1 The port number used for communications. The default port number for Mitsubishi Melsec is 5000.

Tag Commands

The Mitsubishi Melsec Serial Channel Tag supports the tag commands of the Mitsubishi Melsec Channel Tag.

Example Configuration

This is an example of a channel configured to communicate with a Mitsubishi Melsec PLC Tag over UDP protocol to host 192.168.1.20:5000 :

PropertyValue
Host192.168.1.20
Port5000

Relationships to Other Tag Types

The Mitsubishi Melsec UDP Channel Tag builds on the features of these tag types:

Further Information

Alarm Handling

To learn about alarm management.

Glossary

For the meaning of terms used in Fernhill SCADA.